So, today is a laundry day and you gathered your whole week’s clothes into a pile and put them in your Samsung washer, but unfortunately, the washer has refused to spin and drain.
Well, that’s a nightmare. You are now left with a huge drenched ball of clothes that needs manual wringing followed by waiting a long time to get the clothes sun-dried
To your rescue, we have compiled this guide so that you can troubleshoot if your Samsung washer isn’t spinning or drying problems and go on with your laundry day. Let’s move ahead and look for the possible trouble-causing elements and see how you can address them.
PS: Quick Fix Appliance Atlanta is the go-to solution for appliance repair needs all over Atlanta. They also specialize in repairing washers of all renowned brands, including Samsung.
Simple Troubleshooting Tips to Try If Samsung Washer’s Not Spinning and Draining
When your Samsung washer or dryer is not spinning there could be multiple triggers behind it. But you can easily resolve them by identifying the root cause and fixing it.
1. Check the Power
First thing first, if your Samsung dryer is not spinning at all, check the power.
Your washer’s plug should be powered directly into the power outlet rather than using an extension cord and it shouldn’t be loose. In case, you were using a power strip/extension cord, plug your washer directly to the outlet.
To make things double sure, check your breaker box as well to see if you have any blown fuse or tripped breaker.
2. Check If You Loaded Too Much in the Machine
Doing laundry can be a hassle for many of us. We often overload our machines in haste. Resultantly, the uneven load causes the Samsung washer not to spin.
You may also see an “Ub” or “Ur” display if your washer has an uneven load.
Check if your washer’s load is improperly distributed, open the lid, reload it with an even balance, and see if it works.
A rule of thumb is to leave a gap of one hand’s width between the top of the laundry and top of the drum. While washing a larger item itself, you must add some more items so that the load doesn’t turn to one side only.
3. Look for the Door Latch or Lid Switch
If your washer’s door is not properly latched, your washer won’t do its thing.
On the contrary, if the door is closed/latched but your washer still won’t spin, look for any damage or visible changes in the door switch. Because the loading machine will only spin and drain when the lid is closed.
To check if the lid switch is defective, depress the lid switch. If the draining process begins, you may have to extend the stem or similar mechanism (according to your washer’s model) on the lid to depress the switch in top loading machines.
Hopefully, this should do the trick. Otherwise, the lid switch needs a replacement.
4. See if You Poured in Excessive Detergent
Do you think putting in too much detergent will improve the cleaning quality? Sadly, it won’t.
Too much detergent cushions the clothes and doesn’t support the rubbing action, which actually cleanses the dirty clothes. Furthermore, it creates a lot of lather which confuses the washer’s sensor that clothes are still not well-rinsed which prevents the spinning process.
5. Check if the Child Lock is Enabled
Samsung washers also feature a child lock which is a safety mechanism that prevents the machine’s control from being suddenly changed. If the child lock is on, no button on your washer’s dashboard will help with starting the spin cycle.
Mostly a child lock button has a baby icon or a lock with a smiley face. Locate such a button and press it for 3 seconds. It disables the child lock and the washer should start spinning if this was the problem.
6. Try a Reset
Turn your Samsung washer off from the main power point. Pause for a few minutes before you turn this on.
7. Examine Your Washer’s Drive Belt
A washer that would drain but would not spin, may have a faulty or broken belt.
Remove the back panel of the washer and check for any signs of wear and tear on the drive belt.
If the belt has just been displaced, you can fix it by bringing it back to its original place. In other cases, if you witness any abnormality over your belt, such as a crack or damage, you need to get the belt changed by a pro to get your washer spin and drain.
8. Inspect the Drain Hose
When a Samsung washer/dryer does not spin, check if your washer’s drain hose is clogged. Clean up if you find any.
You can also consider using a drain snake to unclog the drain.
Other than getting clogged, your drain hose might get kinky or twisted, which can impede proper drainage.
Adjust the hose to flow the drainage properly. If you plan to drain the water from the hose manually, the method can slightly differ for the top load or front load washers. But turning off the power is the first step you should take
For the top load machine, you need to disconnect the hose and put it in a sink or bucket to empty the washer’s water. Use the same method, if you have a front-load machine with a drain hose.
remove the hose pipe to get anything clogging the way of the water flow, scoop out the water first, or use a bucket so the water pool inside your washer doesn’t create a mess in your laundry area.
However, if your front-load washer comes with a drain pump filter, you need to put a towel and container under the filter. Turn the drain pump filter’s knob to remove the filter and let the water out.
9. Look for Water Level’s Control
Sometimes a wonky water level can also stop your washer from spinning or draining. In such a case, you need to open the machine’s control panel and check the plastic tube attached to the water level valve.
If you find the tube clogged, you may unclog it using vinegar. Or, if the valve is corroded, replace it.
10. Check the Coin Trap/Debris Filter
Samsung washers have a coin trap or debris filter designed to catch any foreign objects, e.g., buttons, coins, or lint, from being washed away.
Check this coin trap or debris filter for any blockage that might be contributing to difficulty in draining.
11. Inspect the Drive Motor
Another underlying cause that might be causing trouble in your Samsung washer can be a burnt drive motor. In this situation, your Samsung dryer will spin for a few seconds and then stop.
If that happens, it’s a sign that you need an appliance repairer’s help since replacing a drive motor is a complicated process.
12. Call in a Professional
Finally, once you have tried all the troubleshooting tips suggested above but nothing really worked, it’s time to bring a professional appliance repair company, such as Quick Fix Appliance Atlanta, into the picture. They’ll perform the required repair or replacement to get your Samsung washer/dryer spinning again.
FAQs:
Why is my washer machine not draining and spinning?
When your washer machine does not drain and spin, the reasons are most likely to be a clogged drain pump or a malfunctioned drain filter.
How do you unclog a washer that won’t drain?
You can first start by cleaning the trap. Then, pour boiling water and baking soda into the drain, use the plumbing snake, and rinse with a high-pressure cleaner.
How do I get my washing machine to spin and drain?
There are multiple simple troubleshooting ways that can get your washing machine to spin and drain, such as balancing the load, resetting your machine, balancing the water level, and so on. However, for a technical issue, you’ll have to ask for professional help.
Get Your Samsung Washer/Dryer Not Spinning Problem Resolved with Quick Fix Appliance Atlanta
The guide sums up all the possible solutions that you can try with your Samsung washer or dryer when it’s not spinning.
However, when you diagnose a mechanical issue or something that you feel is out of your hands, it’s definitely a wise idea to hand over your washer to professionals. Quick Fix Appliance Atlanta has been helping all Atlantans for the past 10 years with fixing their home appliances with cost-effective yet latest technology services.
If your Samsung washer is not spinning and draining, and you’d like to get it repaired at a fair price with Quick Fix Appliance Atlanta, give us a call. For more information or queries, you can visit our website.